Industry News • Premier Construction

Top tips – how adapter checks and upgrades are vital to avoid costly downtime

Written by SL@Roma

Inspecting and replacing bucket tips regularly is essential to avoid machine damage while maximising its output. However, it’s important to match the right tool to both the machine and the work it is doing to optimise performance and machine longevity. Here, Cheryl Griffith, Wear Parts Product Manager at Finning, the world’s largest dealer of Cat® equipment, parts and services, shares her expert view on selecting the right type of tip and what signs to look for when it comes to replacing them.

Work tools are an important part of any machine.  Not only do the tools protect the most expensive machine components, but they also have a direct effect on the productivity, fuel consumption and maintenance costs of your machine. Choosing the right tips at the right time, enables operators to achieve the lowest cost per tonne, whilst also safeguarding the engine and powertrain life of your machine.

These tools have a direct effect on the machine’s ability to perform effectively. A worn out work tool can also increase operator fatigue, for example an increase in cab vibration caused by resistance on the system, means it takes more time to move material, as worn tips lead to less penetration into the pile.

Warning signs

One of the biggest issues we see is when customers don’t have any planned maintenance programmes in place. These are really important as they flag up potential issues with a machine before they become a serious problem. 

Checking your bucket tips regularly as part of a wider check of all your wear components is essential. The kind of environment the machine is working in affects the rate of wear, for example, if a machine is operating in a quarry and working with granite, which is an incredibly hard material, the bucket tips will wear at a quicker rate. 

Visual checks – what to look for:

  • Excessive wear on bucket tips – tips worn through on the bottom or cracked in the pocket area should be replaced.
  • Damage to the bucket tip adapters – badly worn bottom straps worn into the bottom cavity should be replaced.
  • Damaged or missing retainer pins – tap lightly on each pin and if it moves easily replace the retainer.
  • Cracks on the base edges beside adapters and corner welds.
  • Cracks on base edges on the top and bottom of the rear weld.

Enjoying this article? Sign up for our FREE newsletter!

Generally, the tip should look like a triangle shape to the side, but if the tip has a blunt end rather than a sharp end it can really affect the efficiency and impact of the digging process. This means you get less penetration, less efficiency, and it’s not possible to get the full force of the machine into the load to lift the maximum capacity. 

Another thing to check is that you can shake the tip as there should be some play in it rather than it being completely rigid. However, if there’s too much play in the tip, this means the adapter is starting to wear and will make the machine less efficient and reduce tip retention.

When a tip is wearing it can also mean the fuel burn will increase because the machine is having to work harder to break up the same material. This leads to wear to the adapter at the back of the tip, which is why not replacing tips regularly can quickly escalate machine costs as these are more expensive to replace. 

Which product type and tip type to use is something we support customers with because we have a huge Cat product range to choose from to find the best fleet solution for both Cat and non-Cat machines. Our inspection team can also conduct ground engaging tool inspections, so customers have complete peace of mind that they are getting the best out of their wear parts.

For more information and support in selecting the right ground engaging tools for your fleet from the expert team at Finning UK & Ireland go to www.finning.com/en_GB/campaigns/ground-engaging-tool.html

Want to get more great stories from across the construction industry sent straight to your inbox? Click here to sign up for our weekly newsletter!

About the author

SL@Roma