Emerging from the vibrant architectural landscape of Crystal Palace, London, Gbolade Design Studio has achieved a significant milestone for the practice with the completion of Hermitage Mews, a series of eight high-quality townhouses. This project, which marks the studio’s most ambitious sustainability endeavour to date, is designed to meet Net-Zero targets in alignment with both the RIBA 2030 Climate Challenge, highlighting the potential of SME developers to drive impactful, environmentally conscious small site development in the capital.
Hermitage Mews consists of a mix of three and four-bedroom terraced and semi-detached houses on a challenging, narrow, and sloping plot along the car-dominated Beulah Hill. These homes, characterised by their sawtooth roofline and split-level floor plans, offer a balance of privacy and harmony with the surrounding urban context. Front gardens that address Beulah Hill contribute to the development’s aesthetic and environmental appeal, creating beautiful, energy-efficient living spaces that reflect Gbolade Design Studio’s commitment to sustainability and community engagement.
Initially conceived by Nissan Richard’s Architects, Gbolade Design Studio took over during the COVID-19 lockdown, reimagining the design to futureproof the homes, now to accommodate new preferences including remote work and home schooling. The homes are therefore designed to be adaptable spaces, incorporating a Living Room or Home Office alongside a combined Dining/Kitchen area with a study nook, all of which have been optimised for extended occupant use and enhanced acoustics to buffer the noise pollution from Beulah Hill through triple-glazed windows which make the homes incredibly quiet.
Enjoying this article? Sign up for our FREE newsletter!
Addressing the site’s complex topography, with a nearly two-meter drop from front to rear, the architectural design leverages the level difference to create split-level interiors. These design choices result in voluminous, light-filled spaces that feel larger than their actual dimensions, enhancing the overall spatial quality of the homes. The split levels visually connect separate living and kitchen/dining areas, fostering both formal and incidental family interactions. Natural light is drawn deep into the floor plans through carefully placed roof lights, while double and triple-height spaces offer residents unique experiences, such as dining underneath the stars!
Central to Hermitage Mews is a focus on sustainability, targeting the RIBA 2030 Climate Challenge from the outset. The project employs a fabric-first approach with an impressive average U-value of 0.10W/m2K to reduce the operational energy required to run the homes, and utilising timber construction, glulam beams, and woodfibre insulation to minimise embodied carbon. The homes are fossil-fuel free with heating and hot water provided by Air Source Heat Pumps. Solar PV panels are installed on roofs and a robust ventilation strategy (MVHR) ensures low energy use and high occupant comfort levels. Existing trees have been retained on site with new ones planted, green roofs and biodiversity features like hedgehog corridors further enhance the ecological value of the development. Glulam beams were used in place of steel wherever possible and the building layout was revised to streamline the grid structure, reducing the overall weight of the building and resulting reduced concrete foundation need, further minimising the environmental footprint.
Prior to construction, an RIBA Sustainability Output Report was conducted by MEPH consultants (MESH) who measured an Operational Energy requirement of 34kWh/m2/yr and an Embodied Carbon figure of 437kgCO2e/m2, both outperforming the RIBA 2030 target. As Hermitage Mews prepares to welcome its new homeowners, Gbolade Design Studio plans to undertake a 5-year Post-Occupancy Evaluation (POE) to gather occupant feedback and environmental performance data to inform future design decisions and enhance building performance.
The exterior of the homes features a multi-coloured hand-moulded clay-facing brick (Azaela, Vandersanden). This multi-shade red/pink/beige brick has a sanded-coated finish, bringing immediate texture and a sense of character to the new builds which sit in the context of existing deep red-brick neighbouring buildings. The façade also includes horizontal bands of projecting recessed brickwork detail, adding depth and interest to the facades.
Despite facing significant challenges, including the tragic passing of the initial client which halted on-site progress for over a year, Gbolade Design Studio persevered. The project was transferred to a new developer, and the studio continued its commitment to completing the works in honour of their late client’s vision and in alignment with the new client’s ambitions.
Tara Gbolade, Architect and Project Director said: “This project has had its twists and turns, from the COVID lockdown which paused construction, to the Ukraine War which tripled the price of timber used on site, and through to the client unfortunately passing away during construction, which meant the site closed for a year. But one aspect I am most proud of is that we stayed the course to deliver a project that still met its ambitious sustainability targets, serving as an ode to the team who fought so hard for it.”
Team:
- Architecture: Gbolade Design Studio
- Developer: Crystal Management
- Development Management: STA Consultancy
- Structural Engineer: Curtins
- MEPH: MESH Energy
- Bricks: Vandersanden – Azalea
