Old Oak Common
Old Oak Common is a new super-hub set to be the best-connected and largest new railway station ever built in the UK. The station will have fourteen platforms, a mix of six high-speed and eight conventional service platforms, with an 850m-long station box, big enough to fit 6,300 Routemaster buses inside.
Old Oak Common will become one of the country’s most vital transport super-hubs. The station is expected to be one of the busiest railway stations in the country with high-speed rail services to the Midlands, Scotland and the North, and access to central London and Heathrow via the Elizabeth line. Passengers will also be able to travel to Wales and the South West. Its construction and operation will also drive the regeneration of the area around it in West London
Design
Old Oak Common Station will incorporate passenger and retail facilities, providing a high-quality and exemplary customer experience for all passengers and visitors to the station. It will provide direct interchange between high-speed rail and conventional rail services, which will be through eight conventional train platforms, to be served by the Elizabeth line, taking passengers to Heathrow and Central London, as well as to Wales and the South West via train.
Designs for the station show that the six high-speed platforms will be situated underground. They will sit within a 850m-long station box and there will be an integrated connection to the adjoining conventional station at ground level via a stylish shared overbridge. A light and airy concourse will link both halves of the station, unified by a vast roof inspired by the site’s industrial heritage.
For the last two years, Sarah Cardorka, Service Graphics’ National Account Manager, and Sean Peters, Service Graphics’ Docklands Branch Manager, have been working with Balfour Beatty Vinic Systra JV on a range of printed graphics for the HS2 project at Old Oak Common.
Recently, the team supplied and installed a 4m x 3m full-colour wall graphic in the main site office reception area. Sean Commented: “The HS2 is a multi-billion-pound high-profile project, so for us to be supplying this type of work that can be seen by everyone who comes through Old Oak Common’s doors is a great honour and achievement!”
Construction
Work at Old Oak Common to prepare for construction of the station has been ongoing since 2017. HS2’s Enabling Works Contractor, Costain Skanska JV (CSJV), cleared 32,000 cubic metres of former rail depot sheds and outbuildings, working through 105,000 cubic metres of earth to clear the site and remove any contamination built up over a century of continuous railway use.
Six 450m HS2 platforms will be built in the 850m-long underground box, with twin tunnels taking high speed trains east to the Southern terminus at Euston and west to the outskirts of London. Material excavated during work on the tunnels will be removed by rail from the nearby former Willesden Euroterminal depot.
Key works around Old Oak Station
- Station Square: A new public square will be created immediately outside the station entrance providing an arrival space when approaching from Old Oak Common Lane, adjoining the new passenger drop-off, taxi, and bus interchange. It will also include seating and cycle parking.
- East-West Route: A new road and cycleway is proposed, aligned along the northern edge of the station. When the station opens this will provide access for buses, taxis, drop-off, and emergency vehicles.
- New Oak Common: To the west of the station, beyond the station square, an extensive area will be accessible to the public.
- Future development site: An area immediately to the southwest of the proposed station has been identified for commercial development. During construction, this area will be used by the contractor for storage and providing temporary site accommodation. It is anticipated the commercial development of this site will start once the station has been completed.
Old Oak Common is set to be completed between 2029 and 2030.
